Having questions that not on the list? Send us a message!
Surely We Can Help you with your checklist of home improvement and house repairs.
It Is a very simple process, call us or fill up the service request free form and we will be in contact with you immediately.
In Normal Life Situations we Come out to your project the same day to Provide Free quote, Now With The COVID 19 Global issue We come out the next day usually and will start the work in 3-5 days
Of course, it’s ok, actually, this is the normal scenario for the average household and we are ready for all your property improvment tasks
The answer is yes, we do all Kind of Property Improvement Projects for internal and external upgrades, repairs and remodeling, starting from a drywall Patch all the way to your landscaping and driveway paving
You can repair scratches in hardwood with the use of a touch-up kit for urethane finishes as supplied by the hardwood manufacturer. If the scratches are more severe you may need to replace the entire board. If there are numerous scratches throughout the floor, a polyurethane top dressing could be applied over the entire floor. This process is similar to that of waxing a sheet vinyl floor. Again, this may have limitations for the hardwood that has severe damage. In some instances, a full sand and refinish may be the only answer to removing and repairing the scratch and you can consult with us freely
Step 1: While cleaning (steps 3 through 5), be sure to wear rubber or latex gloves and safety goggles, and throw open the windows to avoid exposure to the harsh chemical fumes of bleach-containing solutions.
Step 2: Spray on a commercial grout cleaner or a heavy-duty all-purpose cleaning solution with bleach. Wait for several minutes
Step 3: Scrub the grout with a stiff scrub brush or a grout brush, then rinse thoroughly.
Step 4: Blast mold, mildew or stubborn stains with a bleach-containing cleanser, or make your own using 1/4 cup (2 fl oz/60 ml) chlorine bleach and 1 qt. (32 fl oz/1 l) warm water. Let the disinfectant sit at least 10 minutes to thoroughly kill the mold and mildew.
Step 5: Scrub the grout with a stiff brush or a grout brush, rinse, then dry with a white towel or paper towels.
There are a few common concrete problems:
Sunken concrete is caused by erosion of the sub-base. The best solution for this is to have a contractor raise the concrete surface and inject fresh concrete underneath it.
Frost heaving is most common in cold climates. It is when the cold forces concrete pieces off the ground. The best solution is to remove the damaged pieces and restore the sub-base adding an asphalt board to keep the new concrete sections from attaching to each other.
Cracks or surface deterioration are the most common problems. However, both can sometimes be repaired. Fill small cracks with concrete caulk and for large cracks, use a vinyl-reinforced patching product. As for surface deterioration, this problem is completely widespread with the weakening of the concrete; the best solution to this would be resurfacing, if possible. In some cases, a thin layer of fresh concrete (or an overlay) can be poured over the existing surface.